What Matters Should Be Paid Attention To When The Foaming Machine Is Stopped

1. When removing the mold, wear sleeves and rubber gloves to avoid burns. First press the manual to raise the mold, close the mold, turn off the motor, and then loosen the screw.

2. Turn on the motor, put the mold down slowly, pay attention to the high temperature of the mold, use a forklift to unload the mold, and be careful when washing the mold and changing the mold to avoid danger.

3. When the hanging mold is placed in the mold washing bucket, be careful that the mold will spray gas at high temperature. The operator should keep a distance to avoid danger. The mold should not be soaked in the mold washing bucket for more than 3 days at most.

4. Turn each switch to the "off" position, and turn off the main power switch of the machine tool when the machine is stopped for the last shift during holidays.

5. Clean up the machine tools, workbenches and ground debris, oil stains and dust, and keep the workplace clean and tidy.